Wireless Controller IR-1N Set
|
 This accessory lets you operate the Maxxum 9, 7, 800si, 700si, 600si, 9xi, 7xi, 8000i or 7000i by cordless remote control from up to 60m away. Three separate channels allow any number of cameras to be operated simultaneously or independently in up to three individual groups. The choice of either single frame or continuous drive modes offers you even more versatility.
(Must be used with the FS-1100)
|
|
Macro Stand 1000
|
 A rigid camera support that assures maximum stability in all close-up/macro work, this unit is specifically designed for use in combination with the AF 50mm or AF 100mm Macro lens and Slide Copy Unit 1000. It features a heavy-duty baseboard with mounting index marks for the Slide Copy Unit 1000 and a sturdy column to support the camera.
|
|
Eyepiece Corrector 1000
|
 Eyepiece correctors adjust the viewfinder focus for varying degrees of hyperopia and myopia. Simply mount the eyepiece correctors on the finder to enable use without glasses. Nine strengths are available.
|
|
Magnifier VN
|
 Ideal for close-up, macro, copying, and telephotography, this magnifier enlarges the viewfinder image approximately 2.3 times.
|
|
Angle Finder VN
|
 Used to look through the finder when the camera is in hard-to-view positions, including chest level or low angles. Can be rotated to view from the top, sides or back for copy photography. Selectable 1X or 2X magnification.
|
|
Data Memory Back DM-9
|
Data Memory Back DM-9 can store up to 18 items of photographic data from each of 400 rolls of 36 exposure film on SmartMedia, and offers data imprinting on the outside of the film frame.
|
|
Quartz Data Back QD-9
|
Maxxum Quartz Data Back 9 lets you imprint the date or time on your pictures. It gives you the choice of printing the data as day/month/year, month/day/year or year/month/day. You can also print the time of exposure in 24-hour time format. Data imprinting may also be turned off if you wish.
|
|
Eyepiece Cups EC-9 (9) / EC-1100 (7) / EC-1200
(5) / EC-1300 (70/4/3) / EC-1400 (7D) / EC-1500 (5D) |
Designed to prevent the entry of light from the viewfinder, these eyepiece cups are made of soft rubber to prevent damage to glasses.
|
|
Data Saver DS-100
|
 The Data Saver DS-100 expands the Maxxum 7's photographic data memory capacity via SmartMedia™ cards. The recorded information can then be viewed on the Maxxum 7's Navigation Display or uploaded to a PC. SmartMedia™ cards are available in 2/4MB (data for 400 rolls), 8/16MB (data for 900 rolls) and 32MD(data for 1900 rolls) capacity.
*SmartMedia™ is a registered trademark of Toshiba Corporation.
|
|
Focusing Screens 9, 7D and 7/ Focusing Screens
|
 The
standard Type G (acute-matte) focusing screen may be changed to Type M*1,
Type ML*1 (Super-spherical acute matte), Type
L (matte field with grid) or Type S*2 (matte
field with vertical/horizontal scales) focusing screens. Only at any Konica Minolta
Service Center for the 7, 800si, 700si, 600si and 9xi.
*1 Focusing Screen 9, 7D and 7 only.
*2 Not available for 7D.
|
|
Vertical Control Grip VC-9 (9) / VC-7 (7)
|
 Specially
designed for the 9, 7, the multi-function grip lets you hold and use the camera
vertically with the same ease the camera body gives you during horizontal operation.
The grip allows you to use a choice of AA-size or lithium batteries to run the
camera (the camera by itself accepts only lithium batteries).
|
Holding Straps HS-1 (9, 7D, 7) /
HS-700 (800si/700si/600si) / HS-9xi (9xi) / HS-7xi (7xi)
|
 These new straps help you maintain a firm grip on your Maxxum camera in any holding position.
|
|
Verical Control Grip VC-7D |
 This
grip is made for the Maxxum 7 D to enhance its holding and operation when in a
vertical position. An optional holding strap also gives you a more stable hold
when in a horizontal position. The grip uses either 1 or two lithium-ion batteries,
or 6 AA-size Ni-MH batteries - which means you'll have longer shooting time and
more shooting opportunities.
|
|
AA Battery Pack BP-200
|
 This optional, external battery pack operates your camera with common AA-size batteries, so no matter where you are your Maxxum 5 and Maxxum 4 and Maxxum 3 will always have power.
|
Accessory Shoe Cap
SC-1000 (9/7D/5D/7/70/5/50/4/3/800si/700si/600si/XTsi/HTsi PLUS/STsi/QTsi/500si/400si/300si/5xi/3xi/2xi/SPxi)
|
Used to protect the autolock accessory shoe on Maxxum cameras.
|
|
Close up Diffuser CD-1000 |
Attached to the camera's accessory shoe, the Close-up Diffuser provides soft lighting
and helps produce natural close-up pictures with a built-in flash.
|
|
Remote Cords RC-1000 S/L
|
 Enables remote control of the shutter-release from a hidden location or apart from the camera to prevent blurring. Also provides remote autofocus control.
|
| 
| 
| 
| 
| 
