How to use the ICC-PROFILE for Designjet10PS genuine RIP of HP(attached)

1. Start genuine RIP.

Start the genuine RIP of HP. The screen shown on the right-hand side is displayed.

---

2. Perform calibration.

Always perform calibration for accurate color matching. Click on the Device Setting on the screen and select Automatic Color Calibration from the optional items. Set the "Media and Quality" as follows according to the medium you are using, and also the required print mode. Photolike QP gloss-> HP Proofing Gloss (Premium) or HP Proofing Gloss (Best) Photolike QP silky -> HP Proofing Semi-Gloss (Premium) or HP Proofing Semi-Gloss (Best) In Premium mode, 600dpi*1200dpi single-direction printing is performed and in BEST mode, 600dpi*1200dpi bi-direction at printing is performed. When the calibration button is pressed, calibration starts. Place the medium to be used in the paper tray and wait a moment. Printing starts and after drying, reading starts automatically, and the data is transferred to your PC.

---

3. Return to the screen that is shown in step 1, click on "Device Setting", select "Default Setting", and select the type of print. The following screen is displayed.

• Return to the top of the ICC profile downloading.