| Question: | What are the notes on using flash sync. terminal? | Answer: | Please pay attention to the followings: 1. Set the exposure mode to M mode. 2. Set the shutter speed lower than flash recommended value. If flash does not recommend any shutter speed, set lower than 1/125 sec. (Some flash may be delay to fire.) 3. When connecting to the syncro cord, turn the flash off the power. 4. Please use the flash under 400 voltage of the syncro voltage. It doesn't matter polarity. 5. Red-eye reduction and rear flash sync. cannot be used. 6. We recommend you to set "Custom White Balance". |
|---|
