| Question: | What are the notes on using flash sync. terminal? | Answer: | Please note the followings: 1. Set the exposure mode to M mode. 2. Set the shutter speed lower than recommended value by your flash. If your flash does not recommend any shutter speed, set it at 1/125 sec or slower. If it is set at faster than 1/125 sec., some flash may be out of sync with exposure. 3. Power off the flash in advance of connecting to the sync cord. 4. Please use the flash under 400 voltage of the syncro voltage, with whichever polarity. 5. Red-eye reduction and rear flash sync. cannot be used. 6. We recommend you to set "Custom White Balance". |
|---|
