Primary contents

Interactive Q&A

Question:	The camera connected to USB port is not recognized as a removable disk.
Answer:	Please confirm the following points. Isn't the setting of [Transfer mode] of the setup menu "Remote camera"? - Please choose [Custom 2] -> [Transfer mode] -> [Data storage] and try again. USB connection : See if the camera is correctlly connected to the PC. - The USB cable is firmly plugged in. - The camera is directly connected to the computer's USB port. USB hub may prevent the camera from operating properly. - The CompactFlash is surely loaded into the camera. - If the computer features two or more USB ports, try other port. Battery Capacity: See the battery capacity is sufficent. - Low battery power may prevent the camera from operating properly. Use of AC adapter AC-4/AC-5 is recommended. For Windows Users: Driver - Windows98/98SE requires the dedicated USB driver installed from the DiMAGE software CD-ROM for DiMAGE Xt. - Confirm the condition in the device manager. (See instruction manual) For Macintosh Users: - With Mac OS 9.0 to Mac OS 9.2.2, click the Extensions in the Apple menu to return to the OS default settings and confirm if the connection is recognized by the system.

Question:

The camera connected to USB port is not recognized as a removable disk.

Answer:

Please confirm the following points.
Isn't the setting of [Transfer mode] of the setup menu "Remote camera"?
- Please choose [Custom 2] -> [Transfer mode] -> [Data storage] and try again.

USB connection : See if the camera is correctlly connected to the PC.
- The USB cable is firmly plugged in.
- The camera is directly connected to the computer's USB port. USB hub may prevent the camera from operating properly.
- The CompactFlash is surely loaded into the camera.
- If the computer features two or more USB ports, try other port.
Battery Capacity: See the battery capacity is sufficent.
- Low battery power may prevent the camera from operating properly. Use of AC adapter AC-4/AC-5 is recommended.

For Windows Users:
Driver
- Windows98/98SE requires the dedicated USB driver installed from the DiMAGE software CD-ROM for DiMAGE Xt.
- Confirm the condition in the device manager. (See instruction manual)
For Macintosh Users:
- With Mac OS 9.0 to Mac OS 9.2.2, click the Extensions in the Apple menu to return to the OS default settings and confirm if the connection is recognized by the system.