Primary contents

Interactive Q&A

Question:	Can all the Dynax/Maxxum lenses be used?
Answer:	Yes. Basically all the lenses of A mount type can be used, but some lenses have limitation in functions. Anti-shake: Anti-shake effect cannot be obtained with 1x-3x Macro Zoom lenses. When using with 1x-3x Macro Zoom lenses, please tun off the Anti-shake. Anti-Shake effect decreases when the lens with Macro switch function is set for Macro shooting. Anti-Shake effect decreases when the lens with focus limiter function is used in the focal length other than infinity with limiter setting. (except SSM lenses and Macro (D) lenses) Anti-Shake effect decreases when the AF coupler between the lens and the camera is disconnected. In this case, 14-segment metering and ADI metering do not work, either. (except SSM lenses) AF: AF may not work depending on the combination between lens and teleconverter. (e.g. AF does not work if open aperture is above f8.)

Question:

Can all the Dynax/Maxxum lenses be used?

Answer:

Yes. Basically all the lenses of A mount type can be used, but some lenses have limitation in functions.
Anti-shake:
Anti-shake effect cannot be obtained with 1x-3x Macro Zoom lenses. When using with 1x-3x Macro Zoom lenses, please tun off the Anti-shake.
Anti-Shake effect decreases when the lens with Macro switch function is set for Macro shooting.
Anti-Shake effect decreases when the lens with focus limiter function is used in the focal length other than infinity with limiter setting. (except SSM lenses and Macro (D) lenses)
Anti-Shake effect decreases when the AF coupler between the lens and the camera is disconnected. In this case, 14-segment metering and ADI metering do not work, either. (except SSM lenses)
AF:
AF may not work depending on the combination between lens and teleconverter. (e.g. AF does not work if open aperture is above f8.)