| Question: | The color of an image became strange when using a conventional driver software after scanning with DiMAGE Scan (or DiMAGE Scan after using a conventional driver software). | Answer: | When using different driver software with the scanner is turning ON, be sure to set up the scanner after changing driver software. 1. Pull out the film folder, and close the front door. 2. Activate the driver software. 3. Windows: Press [Ctrl] + [Shift] + [I] at the same time. Macintosh: Press [command] + [Shift] + [I] at the same time. Scanner setup starts. |
|---|
